Our Marble Polishing Process
- Assess. We check the stone, the finish you want and any damage, then give you a fixed quote.
- Deep clean. We strip out dirt, old wax and coatings so the pads work on bare stone.
- Repair. Chips, holes and cracks are filled with colour-matched resin before polishing.
- Hone. Coarse diamond pads remove scratches, etch marks and lippage between tiles.
- Polish. Finer and finer grades bring up the colour and shine. We stop at the finish you chose.
- Seal. A penetrating sealer protects against stains, and we leave you aftercare advice.
We use wet methods, so there is very little dust, and we protect skirting, kitchen units and nearby surfaces before we start.
Honed or High Gloss: Choosing Your Finish
High gloss gives the classic mirror shine. It shows off the veining and suits hallways, reception areas and bathrooms.
Honed is a smooth, satin or matt finish. It hides scratches and etch marks better and is less slippery when wet, so it works well on kitchen floors and busy areas.
Not sure which suits you? We can polish a small test area so you can see both before we start.
What We Polish
- Marble floors, hallways and entrance halls
- Bathrooms, showers and vanity tops
- Kitchen worktops and splashbacks
- Staircases and steps
- Fireplaces and hearths
- Reception floors, lobbies and washrooms in offices, hotels and shops
We also polish granite, limestone, travertine and terrazzo using the same process. See all our stone restoration services, or ask about regular marble maintenance to keep the shine between visits.